Swiss Cord
This model is a low profile lift with a low rope guidance. The re-feeding of the support cord is approximately 3.7m (146'' in) height above the site. The Sunkid Swisscord is used for different applications such as beginner-lifts, logistical or shuttle services solutions in ski areas.
A 16 mm (0.63'' in) polyamide rope with welded rubber grips is used as haul rope. The gearboxes of the drive- and outstations are built into almost enclosed boxes; height can be adjusted mechanically to 2.8 m (110'' in) on a vertical square pole. This enables the simple adjustment of the tow rope to the current snow conditions on the route.
Technical highlights
- motor power 5,5 to 11kW (7.5 to 15 PS) depending on length and inclination
- ATLAS polyamide fiber rope with rubber-grips
- max. transport length 300m (985' ft)
- max. grade for beginner 15%, commuter lift up to 20%
- variable speed by frequency-converter from 0 - 2,0 m/sec (395 ft/min)
- portable and pluggable e-box
- folded stopgabe at the bottom and top station
- drive station top or ground (at choice)
- weight:
- drive station approx. 1.200kg (2,650 lbs)
- return station approx. 1.000kg (2,200 lbs)
- minimum height 3,7m (146'' in)
- entrance/exit both sides possible
- motor-driven height adjustment of both stations for max. 2,8 m (110'' in)
- set up on foundation plates
- permition without supervision possible
- capacity: up to 720 people per hour